Our manufacturing base is currently in a full production mode and is not influenced by the COVID-19. Please feel free to contact us at [email protected] if you would like to place the order.

Deep groove Ball Bearing

Deep groove Ball Bearing

Series:

Series

Range

click above to view corresponding specifications

The Deep Groove Ball Bearing is the most widely used among the roller bearings. It has simple structure and easy usage. It is mainly used to bear the radial load. The bearing can possess the performance of the Angular Contact Ball Bearing (i.e. support the axial load) by increasing the height coefficient of the rib and increasing the radial clearance. Compared with other bearings with the same dimension, the Deep Groove Ball Bearing is characterized by the lower friction coefficient and higher speed limit, but it has low impact resistance and is not applicable to bearing heavy load.

Within the allowable axial clearance, the bearing mounted can limit the shaft and the axial position of the housing, so it can be used as a bidirectional locating bearing. In addition, due to the arc raceway, the bearing possesses the self-aligning function; therefore, it can still work normally when the angle between inner and outer rings is between 3' and 11'. However, this situation could reduce the service life.

The Deep Groove Ball Bearing is widely used for automobiles, tractors, machine tools, electric motors, water pumps, agricultural machines, textile machines, etc.

The stamped wavy cages made of steel plate are usually used in the Deep Groove Ball Bearing. Additionally, the lathed cages made of solid brass are usually used in the large-size bearings.

MESSAGE

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.

Online customer service
WhatsApp : us hg technology corporation
Phone : +1(617)816-5811
WhatsApp : Tony Zhao
Phone : +1(617)997-1606
Skype :Katrina JIAO
E-mail :[email protected]