Thin section Bearings were developed to solve the actual challenges when conventional ball bearings can’t solve. As the name, thin section bearing implies the difference between inside and outside diameters of the rings has been minimized or thinned out.
The analysis of the reason for the damage of cylindrical roller bearings is an elaborate technical process, especially for the handling of accident scenes. Based on the years of on-site processing experience our company encountered, we have summarized four points for your reference.
After installing the rollers and clearance cage, the separable inner ring (or outer ring) will be fixed with the shaft washer. In order to prevent the separation, the installation of the shaft washer should be simple. The clearance cage enables the friction between rollers to be disappeared and prevent rollers from falling down on one side, which is able to obtain a stable torque.
Harmonic reducer is generally used in the fields of robots, machine tool, and aerospace, etc. These fields have high requirements for the precision of harmonic reducer, rigidity, and loading capacity; therefore, the parts inside of harmonic reducers are required to have high production precision and mounting precision.
The functions of Lubricants are not only including protecting bearing surfaces from corrosion, the Lubricants are also reducing friction and preventing metal-to-metal contact between balls and raceway etc. Lack of lubrication or inadequate lubrication is the most common cause of bearing failure.
Four-row Cylindrical Roller Bearing is also often used as roll bearing. Compared with Four-row Tapered Roller Bearing with the same cross section the rated load is higher. This kind of bearing can only bear radial load. It can bear axial load only when matched with other thrust bearing.
The inner and outer rings and rollers of cylindrical ro […]
1. Trailer: This type of slewing bearing is used in a v […]
Many congratulations to “Formule ETS from École de technologie supérieure, in Montréal won the FSAE-Michigan, Michigan, USA (5th position / 114 teams), FSAE-North, Barrie, Ontario (1st position / 30 teams), FS-Spain, Barcelona, Spain (6th position / 75 teams) and UofT, Toronto, Ontario (1st position / 30 teams) during the 2018 season.
Team head coach Alex particularly emphasized the bearings made by US HG TECH Corp. Here is what he said in his email to us.
Only the bearing housing that has been cleaned and assembled can be put into operation; therefore, the appropriate way to clean and assemble bearing housing is important, which not only increases hot rolling mill sbearing’s service time but also improves bearing’s productivity and avoids wasting materials. This article will introduce you how to clean and assemble the bearing housing.
High carbon chromium bearing steel refers to the high carbon alloy steel with 1.30-1.65% of chromium. Its features are: the micro organization after heat treatment is comparatively even and stable, good abrasion, high stress fatigue strength, good size stability and anti-abrasion. This type of bearing can satisfy the requirement of working under general working condition.
The operating feature of High Speed Wire Rod Rolling Mill Bearings is that it can operate under high-speed and high-impact conditions continuously, stably and reliably, and it also has long service life.